Sync XYZ for Synchro Application
Edit this on GitLab
Synchro Application Outputs are X, Y, Z
I have a synchro application where my signal outputs are defined as X, Y, and Z. Where do I connect these pins using NAI’s pin description S1, S2, S3, S4?
Using the ARINC 407-1 specification description, the NAI convention is as follows:
NAI Connection |
ARINC 407-1 |
S1 |
X |
S2 |
Z |
S3 |
Y |
S4 |
No Connection |