NAI Multifunction I/O Board Startup Overcurrent Latched
Edit this on GitLab
Overcurrent Latched on Startup
When power is first applied to our VME chassis where the NAI Multifunction I/O Board resides, the D/A module sometimes gets in a latched overcurrent condition. There is nothing connected to the D/A outputs. When the issue occurs, the NAI diagnostics indicate that the D/A module has an overcurrent condition via query to the overcurrent status register and we observe that the D/A output channels 1-4 are always at 0V.
During power on, and while the board is configuring (booting), there may be spurious conditions where the D/A channel senses a ‘false' overcurrent condition. The solution is to perform a status ‘check' and “reset overload” as part of your initialization process [VME 64C2_DA_ResetOverload() command].