FM Module Setup for Intel/PPC
Edit this on GitLab
FM MODULE SETUP FOR INTEL/PPC
-
Press esc during bootup
-
Enter Setup utility
-
In Advanced tab select IDE Configuration
-
Enable SATA Port 3
-
In Boot tab select Legacy >
-
Use F5/F6 to put SM65GEB at the top
-
Connect to motherboard serial in teraterm
-
Start motherboard into uboot by hitting esc in TeraTerm
-
Copy and paste following commands:
# Module 2 i2c dev 3 i2c probe
# Write Module ID (FM5) and Size (0) to EEPROM i2c mw 51 00.1 0x46 1 i2c mw 51 01.1 0x4D 1 i2c mw 51 02.1 0x35 1 i2c mw 51 03.1 0x00 1 i2c mw 51 04.1 0x00 1 i2c mw 51 05.1 0x00 1 i2c mw 51 06.1 0x00 1 i2c mw 51 07.1 0x00 1
# Write Special Configuration registers to EEPROM i2c mw 51 A0.1 0x06 1 i2c mw 51 A1.1 0x04 1 i2c mw 51 A2.1 0x00 1 i2c mw 51 A3.1 0x01 1 i2c mw 51 A4.1 0x00 1 i2c mw 51 A5.1 0x00 1 i2c mw 51 A6.1 0x0F 1 i2c mw 51 A7.1 0xF0 1
# Check Values i2c md 51 100 i2c read 51 A0.1 20 100000 md.b 100000 100