Module Getting Started Guides
26 items under this folder.
AC Module Guide
Getting started with the NAI AC reference voltage / signal-source module family.
AD Module Guide
Getting started with the NAI AD analog-to-digital module family.
AR Module Guide
Getting started with the NAI AR ARINC avionics-bus module family.
CB Module Guide
Getting started with the NAI CB CANbus communication module family.
CD Module Guide
Getting started with the NAI CD chip-detector and fuzz-burn module family.
CH Module Guide
Getting started with the NAI CH1 Chassis Manager module — VITA 46.11 chassis management for OpenVPX/SOSA systems.
DA Module Guide
Getting started with the NAI DA digital-to-analog module family.
DF Module Guide
Getting started with the NAI DF differential digital I/O module family (DF1, DF2).
DL Module Guide
Getting started with the NAI DL digital-to-LVDT/RVDT position simulation module family.
DS Module Guide
Getting started with the NAI DS/DR digital-to-synchro/resolver simulation module family.
DT Module Guide
Getting started with the NAI DT module family.
EM Module Guide
Getting started with NAI's EM-series Ethernet NICs — the dual-port Gigabit EM1 is a standard PCIe network controller driven by your SBC's OS, no NAI SSK required.
Encoder Module Guide
Getting started with the NAI EC1 encoder smart function module — SSI, counter, and quadrature modes.
ES Module Guide
Getting started with NAI's ES-series managed Ethernet switch — the ES2 is a 16-port Gigabit + 10 GbE fiber L2/L3 switch you configure over its management plane or from the host SBC.
FT Module Guide
Getting started with the NAI FT MIL-STD-1553 and MIL-STD-1760 avionics-bus module family.
LD Module Guide
Getting started with the NAI LD LVDT/RVDT-to-digital position measurement module family.
PT Module Guide
Getting started with the NAI PT1 Pulse Timer Receiver & Generator module.
RG Module Guide
Getting started with the NAI RG1 IRIG timecode receiver/generator module.
RY Module Guide
Getting started with the NAI RY relay module family — RY1 (non-latching) and RY2 (latching).
SC Module Guide
Getting started with the NAI SC serial-communications module family.
SD Module Guide
Getting started with the NAI SD synchro/resolver-to-digital module family.
SG Module Guide
Getting started with the NAI SG strain gauge measurement module family.
TE Module Guide
Getting started with the NAI TE TTEthernet family — deterministic, tri-redundant Ethernet (IEEE 802.3, ARINC 664/AFDX, SAE AS6802) built on TTTech's End System.
Thermocouple/RTD Module Guide
Getting started with the NAI thermocouple and RTD temperature-measurement module family (TC1, RT1, TR1).
TL Module Guide
Getting started with the NAI TL TTL/CMOS digital I/O module family.
VR Module Guide
Getting started with the NAI VR variable-reluctance speed, torque, and pulse-counter module family.