NAI BSP Guide for VxWorks 7 — NIU1A

Applies to VxWorks 7 SR0660, 22.09, 23.03, 24.03, 25.03, 25.09, and 26.03. Releases 25.03 and later use the AMD variant of the BSP — see Warnings.

Warnings

  • Two variants of the NIU1A BSP exist. For VxWorks 7 25.03 or later use the AMD variant; for earlier releases use the standard naiNIU1A BSP. Wind River renamed the Xilinx driver components and device-tree bindings to AMD equivalents in those releases, so NAI carries a matching copy of the BSP (AMD_Fix/naiNIU1A in this repository).
  • The NIU1A is validated only with the ARMARCH7 CPU in the SMP + 32-bit (ILP32) VSB configuration. Booting from SATA requires U-Boot 2014.01 Aug 26 2025 - 14:57:25 00002.00006 or later on the NIU1A — see section 5.4.

Overview

This guide covers installing the NIU1A BSP and building a VxWorks 7 kernel image from it: the VxWorks Source Build (VSB), the VxWorks Image Project (VIP), and the SSK2 downloadable kernel module (DKM) that carries the NAI libraries and sample applications. It then covers booting the finished image on the NIU1A with U-Boot, over the network or from SATA.

The supplied delivery contains the following folders:

base
naiNIU1A
Documentation

naiNIU1A is the NIU1A BSP. base contains the NAI library (SSK) and the sample application sources for the NIU1A and its function modules. Documentation contains the NAI library documentation for each function call in the SSK.

1. Install the BSP

Copy the naiNIU1A folder into the VxWorks installation’s board directory for your release.

For VxWorks 7 SR0660:

$(WIND_BASE)/pkgs_v2/os/board/xilinx/

For VxWorks 7 22.09, 23.03 and 24.03:

$(WIND_BASE)/source/os/arch/arm/board/xilinx/

For VxWorks 7 25.03, 25.09, and 26.03:

$(WIND_BASE)/source/os/arch/arm/board/amd/

2. Create the VxWorks Source Build (VSB)

  1. Open Workbench and select File > New > Wind River Workbench Project.
  2. Click Based on Category > select Platform Development.
  3. Click Build Type > select VxWorks Source Build > Next.
  4. Name the project (for example naiNIU1A-vsb) > Next.
  5. Click the BSP dropdown and select naiNIU1A_x_x_x_x with CPU ARMARCH7.
  6. Ensure “Link in sources to project” is checked.
  7. Under the source build options, select SMP support and 32-bit (ILP32).
  8. Click Finish to create the VSB.
  9. Right-click the VSB project and select Build Project.

NOTE: Only the ARMARCH7 CPU with SMP + ILP32 is validated on the NIU1A — see Warnings.

3. Create the VxWorks Image Project (VIP)

  1. Open Workbench and select File > New > Wind River Workbench Project.
  2. Click Based on Category > select Platform Development.
  3. Click Build Type > select VxWorks Image Project > Next.
  4. Name the project (for example naiNIU1A-vip) > Next.
  5. Base the VIP on the VSB project built in section 2. Make sure the VSB project and BSP name are correct, then click Next.
  6. Click Profile > select PROFILE_DEVELOPMENT > Finish.

NOTE: PROFILE_DEVELOPMENT is recommended while a project is in the development phase.

Then configure the kernel:

  1. Expand the VIP project and double-click Kernel Configuration > Bundles.
  2. Right-click NAI BSP default components > Add.
  3. Right-click Standalone kernel shell > Add.
  4. File > Save (or Ctrl+S).

NOTE: The NAI BSP default components bundle includes the NAI BSP in its entirety. The standalone kernel shell adds components useful during development. The VIP is built at the end of section 4, after the DKM is referenced.

4. SSK2 Downloadable Kernel Module (DKM)

The DKM carries the NAI libraries (SSK) and sample applications and is linked into the kernel image through a VIP project reference.

4.1 Create the DKM

  1. Open Workbench and select File > New > Wind River Workbench Project.
  2. Click Based on Category > select Application Development.
  3. Click Build Type > select Downloadable Kernel Module > Next.
  4. Name the project (for example naiNIU1A-dkm) > Next.
  5. Click Based on > select a source build project, ensure the VSB from section 2 is selected, then click Finish.
  6. Delete the automatically created dkm.c.
  7. Add the nai_bsp, nai_libs, mbcore_base, and nai_sample_apps folders (from the delivery’s base folder) into the DKM project.

NOTE: If nai_bsp contains more than one naibsp_config_<sbc>_vxworks7 folder, bring in only the one for this board — naibsp_config_niu1a_vxworks7.

4.2 DKM include paths

  1. Right-click the DKM project and select Rebuild Project. On the first build you are prompted to generate the include paths.

  2. Click Generate Includes… > Next > Add and add the following paths to the DKM project:

    $(PRJ_ROOT_DIR)
    $(PRJ_ROOT_DIR)/nai_bsp
    $(PRJ_ROOT_DIR)/nai_bsp/naibsp_config_niu1a_vxworks7
    $(PRJ_ROOT_DIR)/mbcore_base/common/include
  3. Click Finish.

  4. Right-click the DKM project > Rebuild Project.

4.3 Reference the DKM from the VIP

  1. Right-click the VIP project and select Properties > Project References.

  2. Check the box for the DKM project and click Apply and Close.

  3. Right-click the VIP project again and select Properties > Build Properties > Paths > Add, then add the following paths, replacing <PATH_TO_DKM_PROJECT> with the actual DKM project path:

    <PATH_TO_DKM_PROJECT>/nai_bsp/naibsp_config_niu1a_vxworks7
    <PATH_TO_DKM_PROJECT>/nai_bsp
  4. Click Apply and Close.

  5. Right-click the VIP project > Rebuild Project.

At this point the kernel image is built and ready to be loaded onto the NIU1A.

5. Booting VxWorks 7 with U-Boot

This section covers booting the newly created VxWorks image with U-Boot, over the network via TFTP or from SATA.

Before starting, attach a serial cable between the NIU1A and the host PC, connect the board to the same network as the host, and open a terminal emulator on the host. Every prompt from section 5.3 onward — U-Boot and the VxWorks shell — is reached over that console.

Baud rate:    115200
Data:         8 bit
Parity:       None
Stop:         1 bit
Flow control: None

5.1 Host TFTP server

Start a TFTP server on the host PC. For Windows:

$(WIND_BASE)/host/x86-win32/bin/tftpd32.exe

Set Current Directory to the directory that contains the uVxWorks and naiNIU1A.dtb files:

$(WIND_HOME)/workspace/<VIP_PROJECT>/default

5.2 Host FTP server (WFTPD)

The TFTP server only hands uVxWorks and the DTB to U-Boot. The FTP server backs the /host.host file system the running VxWorks kernel mounts (it appears in the devs listing in section 5.4.2), using the u=/pw= credentials from the boot line. The mount is made at boot, so start the FTP server before booting the target. Booting continues without it, but section 5.4.3 copies the image files off /host.host to SATA — that step needs the mount in place.

Start an FTP server on the host PC. For Windows:

$(WIND_BASE)/host/x86-win32/bin/wftpd32.exe

Configure the FTP server as follows:

  1. Click the Security tab > users/rights > New User.
  2. Username: winner
  3. Password: winner
  4. Home Directory: the same directory the TFTP server points to.

NOTE: The username and password must match the u= and pw= values in the vxargs boot line (sections 5.3 and 5.4). If you choose different credentials here, change them there as well.

5.3 U-Boot network boot

Stop U-Boot on the NIU1A by pressing the Esc key. Once at the U-Boot prompt, modify the U-Boot environment variables to reflect your environment. During boot the VxWorks kernel reads the bootargs variable to get the host, target and network mask, as well as the username and password for the FTP server running on the host.

U-Boot environment variables:

setenv ipaddr 192.168.1.16
setenv netmask 255.255.255.0
setenv serverip 192.168.1.5
setenv vxargs 'setenv bootargs gem(0,0)host:vxWorks h=192.168.1.5 e=192.168.1.16:ffffff00 u=winner pw=winner f=0x00'
saveenv

NOTE: h in vxargs and serverip are based on your host PC IP configuration.

To boot the VxWorks kernel over the network:

tftpboot 0x05000000 uVxWorks
tftpboot 0x04000000 naiNIU1A.dtb
run vxargs
bootm 0x05000000 - 0x04000000

To automate booting over the network:

setenv vxBootTftp 'tftpboot 0x05000000 uVxWorks && tftpboot 0x04000000 naiNIU1A.dtb && bootm 0x05000000 - 0x04000000'
setenv vxBootCmdTftp 'echo Loading VxWorks from TFTP... && run vxargs && run vxBootTftp'
setenv bootcmd run vxBootCmdTftp
saveenv

On the next power cycle, the target boots VxWorks over the network automatically.

5.4 Booting from SATA

The NIU1A supports booting the VxWorks image directly from SATA. The board is first booted once over TFTP so the SATA drive can be formatted and the image files copied to it from the VxWorks shell.

To boot from SATA, the U-Boot on the NIU1A must be the version shown below or later. Contact the factory for an updated U-Boot if the version on the NIU1A is older.

U-Boot 2014.01 Aug 26 2025 - 14:57:25 00002.00006 

5.4.1 Set up the U-Boot environment

Stop U-Boot on the NIU1A by pressing the Esc key. Once at the U-Boot prompt, set up the environment exactly as in section 5.3 (ipaddr, netmask, serverip and vxargs, followed by saveenv). If you have already worked through section 5.3, saveenv stored those values and they are still in place.

Then load and boot the kernel over TFTP:

tftpboot 0x05000000 uVxWorks
tftpboot 0x04000000 naiNIU1A.dtb
run vxargs
bootm 0x05000000 - 0x04000000

5.4.2 Format the SATA drive

U-Boot needs a FAT32 filesystem to boot a VxWorks kernel. After booting the image, retrieve the name of the SATA device on the NIU1A. Enter the following at the VxWorks command line:

devs

The SATA device appears in the listing as /ata0a:

drv refs name
  3 [ 3] /ata0a
  9 [ 3] /host.host
  0 [ 5] /null
  1 [ 5] /ttyS0
  2 [ 3] /vxbus

If /host.host is missing from the listing, the FTP server was not up when the kernel booted — start it (section 5.2), boot VxWorks again over TFTP as in section 5.4.1, and repeat this section.

NOTE: The mount is named host.<host-name> after the host-name field of the vxargs boot line (section 5.3), so gem(0,0)myPC:vxWorks would give /host.myPC instead. This section and section 5.4.3 will refer to /host.host.

To write to the SATA on the NIU1A, the SATA write protection must be disabled. Enter the following at the VxWorks command line:

naiSetSataWriteProtect 0

Then format for FAT32:

dosFsVolFormat "/ata0a",0x20

The format reports its progress and ends with OK.

5.4.3 Copy the VxWorks image to SATA

Once the SATA drive has been formatted, copy naiNIU1A.dtb and uVxWorks to it.

The FTP server’s home directory (section 5.2) is the VIP’s default folder, and the running kernel mounts it as /host.host — the image files are reached there directly. On the VxWorks command line:

cd "/host.host"
cp "naiNIU1A.dtb","/ata0a"
cp "uVxWorks","/ata0a"

Once both files have been copied to SATA, power cycle the NIU1A to configure U-Boot.

5.4.4 Configure U-Boot for SATA boot

Stop U-Boot on the NIU1A by pressing the Esc key. Once at the U-Boot prompt, modify the U-Boot environment variables to reflect your environment:

setenv dtbvipbootstart 0x04000000
setenv vipbootstart 0x05000000
setenv vxBootSata 'sata init && fatload sata 0 ${vipbootstart} uVxWorks && fatload sata 0 ${dtbvipbootstart} naiNIU1A.dtb && bootm ${vipbootstart} - ${dtbvipbootstart}'
setenv vxBootCmdSata 'echo Loading VxWorks from SATA... && run vxargs && run vxBootSata'
setenv bootcmd run vxBootCmdSata
saveenv

On the next power cycle of the target, VxWorks boots from SATA automatically.

Revision History

RevRevision DateDescriptionAuthor
1June 28, 2021Initial ReleaseHP
2December 12, 2023Updated for VxWorks 22.03 and laterMS
3December 21, 2023Fixed booting from QSPI instructionsMS
4March 21, 2024Changed tftp to tftpboot in boot instructionsMS
5July 16, 2024Added note about Ethernet on 2018 NIU1AMS
6September 20, 2024Added support to boot VxWorks from SATAHP
7August 26, 2025Updated for NIU1A and fixed typosMS
8September 18, 2026Markdown edition of this guide, replacing the Rev 7 Word/PDF versionFC