Set DHCP/Remove Static IP
How can I set DHCP/Remove Static IP on my Gen 5 I/O Board?
When logging into the board over serial communication, write the following line to change the MB EEPROM Ethernet Miscellaneous Settings: (For Port A) mbeeprom_util set EthA_MiscSettings -------- (For Port B) mbeeprom_util set EthB_MiscSettings -------- Followed by one of the 8 digit hex values below, based required option:
| Static IP: | AutoNeg: Yes | AutoNeg: No 10 MBPS Full Duplex | AutoNeg: No 100 MBPS Full Duplex | AutoNeg: No 10000MBPS Full Duplex | AutoNeg: No 10 MBPS Half Duplex | AutoNeg: No 100 MBPS Half Duplex | AutoNeg: No 10000MBPS Half Duplex |
|---|---|---|---|---|---|---|---|
| Yes | 00000000 | 00000046 | 0000004A | 0000004E | 00000026 | 0000002A | 0000002E |
| No | 00000001 | 00000047 | 0000004B | 0000004F | 00000027 | 0000002B | 0000002F |
Ex: mbeeprom_util set EthA_MiscSettings 00000001 for DHCP and AutoNegotiated Ethernet